It is well known that the wire straightener plays an important role in the building construction sites. Therefore, almost every building construction site now has a wire straightener, and some even have multiple. In the past when the productivity was not developed enough, if the the steel bars for the building construction were bent or fouled, they could only be straightened by simple tools by human labor. This is not only inefficient, the effect of straightening is not good either. Even to break the stell bar and makes it completely useless.
Later, some one invented and manufactured a multi-functional wire straightener. With this kind of machine, the straightening of the steel bar became much simpler. Later on, the machine was used more and more, and the application range got wider and wider. Some people use the machine reasonably and carefully during the process, then it can be used for a long time without failure. But many construction workers or merchants who rent steel bars use the wire straightener very casually, completely disregarding the principle of machine operation, and conduct the using very roughly which are easy to break the machine, and some people even blame the quality of the machine itself. As a manufacturer of wire straightener, we would like to say that even machines with particularly good quality can't stand their ruin in such a bad behaviour. Although the machines are not like human who know that they are tired, but they also need to take rest and good maintenance. Only if the wire straightener is operated properly and gets timely maintenance can we prolong the use of good equipment even longer.
If you damage the machine during operation, you must also repair it in time. You can't let the machine work with the disease and injury. Some may continue to use the injured machine to save money. This will cause continuous damage to the wire straightener machinery. If you only think of repairing after there is a major failure happening to the entire machinery, the maintenance cost can be several times more. It may even be impossible to repair the machine, and could only buy a new machine then, which will not be worth the candle.
September 4, 2017Building a community of shared future for all humankind and building a new type of international relations based on cooperation and mutual benefit, the Belt and Road initiative, the right approach to ...view
April 28, 2019Using Techniques of Wire Mesh Welding Line1) When doing the welding and cutting work, especially when cutting gas,sparks, molten beads and iron slag splash around (larger beads and iron slag can splas...view
August 29, 20191. Adjust the straightening block. There are five straightening blocks in the general straightening cylinder of wire straightening and cutting machine.The first and fifth straightening blocks must be ...view
November 9, 2018The rebar cutting machine is mainly composed of motor, belt drive mechanism, flywheel, gear deceleration mechanism, rotary key mechanism, crankshaft slider and replaceable cutter. Now it is more and m...view
April 10, 2019In previous construction projects, straightening, bending, cutting or forming rebars were all done manually. But with the development of science and technology, more and more steel processing machiner...view
September 1, 2019Common problems of wire straightening and cutting machine and corresponding solutions(1) There is a solution to the problem that the steel bars cannot be straightened.The processed steel bars are unth...view