Rebar shear machine is mainly divided into: full-automatic rebar shear machine and semi-automatic rebar shear machine. The fully automatic rebar shear machine, also known as the electric cutter, using the motor to convert the electric energy into kinetic energy to control the cutter cut, so as to achieve the effect of cutting steel bars. For the semi-automatic rebar shear machine, the incision is controlled manually to cut steel bar. At present, there are more hydraulic rebar shear which should belong to hydraulic rebar shear. Hydraulic rebar shear can be divided into charging type and portable type.
Compared with other equipment, the rebar shear machine is lighter in weight, less in energy consumption, safe and reliable in use, and high in efficiency. Therefore, these shears are gradually used in the process of building processing, which plays an important role in China's economy and construction. It is one of the indispensable equipment in the process of steel bar processing, which is mainly used in housing construction, bridges, tunnels, power stations, large-scale water conservancy and other projects to process specific steel bars, so that a relatively satisfactory building can be built.
Classification of rebar shear machine: applicable to cutting of various ordinary carbon steel, hot-rolled round steel, screw steel, flat steel and square steel in Construction Engineering
June 24, 2019Production technology and quality requirements of wire cage1. The material and quality of rebar must be checked before welding wire cage by wire cage welding machine. Only after qualified, can wire ca...view
November 21, 2018Main Test Steps:1. The section which from 200mm to 250mm is checked on the metal wire to be calibrated and the surface of the wire must not be damaged when straightening.2. The radius of the clip is R...view
December 27, 2020It's very important to use steel straightener in construction site. Generally speaking, this kind of equipment is in the charge of professionals. If there is more steel to be disposed of, it must ...view
May 25, 20191. According to the specific conditions of the truss, first of all, it should be decomposed into several parts as far as possible and processed and welded in the inner field by truss girder welding ma...view
May 7, 20191. Structural characteristics and main technical requirementsThe lower interrogation platform is the largest active part connected to the main tower. It is mainly composed of hinge seat, main truss, t...view