TJK Machinery (Tianjin) Co, Ltd
Stirrup Bender WG12F
I WANT TO BUY PRODUCTS

Stirrup Bender WG12F

Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion
CONTACT NOW
Stirrup Bender WG12F VIDEO
Features Related Products More Detail

Features of Stirrup Bender WG12F

  • 1
    This CNC intelligent processing machine is workable with a variety of stirrups and long plate reinforced, which is also multi-functional stirrup bending machine, changing plate reinforcement and stirrups function can be automatically switched within 2 seconds, which without any manual adjustment;
  • 2
    Telescopic two-tier access to institutions, reliable, low noise;
    Large structural design ensures processing with large range of wires, workable with the width of the bar hook up to 1m and the maximum length bar up to 12m bar; the largest stirrup side length up to 2100mm;
  • 3
    With a reverse correction mechanism to ensure that the finished product flatness of the bar;
  • 4
    Four-wheel servo-driven loopback mechanism designed to ensure the accuracy of returning of ± 1mm;
  • 5
    Machine has disc bending mechanism which avoids the stirrups collision and ensures the product pass rate of 100%;

Related Products Stirrup Bender WG12F


  • Stirrup Bender WG12G
    Automatic multifunctional machine to work hot-rolled, cold-rolled or cold-drawn wire rod in coils, to produce a continuous automatically collected stirrup or single stirrup Stirrup Bender WG12G
  • Stirrup Bender WG16B
    Stirrup Bender WG16B(steel bar bending machine) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion. Stirrup Bender WG16B
  • Stirrup Bender WG12D-4
    Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted. Stirrup Bender WG12D-4
  • Stirrup Bender WG16F
    Stirrup Bender WG16F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion. Stirrup Bender WG16F
  • Stirrup Bender WG12E
    The automated wire bending and cutting unit of Stirrup Bender WG12E, driven by servomotor, is equipped with turning and retractile bending pins Stirrup Bender WG12E
  • Stirrup Bender WG13B
    Straightening mechanism has a position sensor which can accurately remember different steel straightening wheel pressure reduction, equipped with CNC memory straightening function which making the replacement of steel very simple and accurate. Stirrup Bender WG13B
  • Stirrup Bender WG12B-2
    The bending and cutting unit of Stirrup Bender WG12B-2(stirrups rebar), driven by servomotor, is equipped with turning and retractile bending pins Stirrup Bender WG12B-2
  • Stirrup Bender WG12F
    Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion Stirrup Bender WG12F

More Detail Stirrup Bender WG12F

Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of Stirrup Bender machine WG12F, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this wire stirrups bender WG12F, many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.

  • A stirrup bender WG12F available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.
  • The stirrup bender WG12F needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.
  • With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.

Technical Data of Stirrup Bender WG12F

Production capacity

Single wire

Φ5 – 13 [mm]

Double wire

Φ5 – 10 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1200 [°/sec]

Max. pulling speed

110 [m/min]

Mandrel diameter

Φ25 – Φ30 [mm]

Max shape length

12m

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

6 [l/min]

Average electric power consumption

5 [KW]

Bending Pcs

≤2

Air pressure

≥0.6Mpa

Labeled electric power

26 [KW]

Bending shaps

600

Voltage

380 [V] – 50 [Hz]

Overall machine weight

5,160 [Kg]

Overall dimension

15050 × 1350 × 1900 [mm]

Leave a Message Email Us

we will contact you within 24 hours.

online