Stirrup Bender WG12D-5 has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted
Don't need to replace the mold to process bi-directional bending;
Wheels for straightening are large diameter ensures large pressing power and pressing area, all lower wheels are driven wheels, ensures fast and good quality straightening.
Fully automatic CNC stirrup bending machine has the integral mechanism design of straightening system, fulfil the domestic needs of the new three-level steel processing, anti-overload, high-temperature capability;
The machine can be connected with the software management system to achieve automatic data transmission and scan input.
Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion
Stirrup Bender WG16F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion.
Straightening mechanism has a position sensor which can accurately remember different steel straightening wheel pressure reduction, equipped with CNC memory straightening function which making the replacement of steel very simple and accurate.
Stirrup Bender WG16B(steel bar bending machine) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion.
Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted.
Stirrup Bender WG12D-5 has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted
More Detail Stirrup Bender WG12D-5X
Stirrup Bender WG12D-5X has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.
The bending and cutting unit of Stirrup Bender WG12D-5X, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.
For this cnc wire bending machine, many electric and pneumatic parts are imported from Japan and Germany, such as PLC, servomotor and reducer.
A CNC wire bending machine available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.
The Stirrup Bender WG12D-5X needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.
With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.