The rebar cutting machine is a kind of machine used for steel bar processing. It can really promote the construction industry. For users, what are the matters needing attention in the process of using the steel bar cutter? And how to make the steel cutting machine use more easily? Let's get to know some information about it.
First of all, before the machine is shipped to the home, we should pay attention to the placement of the rebar cutting machine. It should be placed in a space where the processing environment is spacious, so that it can be used for later processing. At the same time, the machine should be in a horizontal position as far as possible to ensure the accuracy of processing steel bar. At the same time, before starting a steel cutting machine, we need to make a general inspection of the equipment, we should know whether the circuit of the equipment is normal and whether the processing part of the machine is reasonable. Because of the different processing specifications, the rebar cutting machine needs to be controlled within a reasonable range.
Secondly, we should not rush to use the machine after opening the machine, but have a full understanding of the overall situation of the machine. The good way to operate is to turn the machine into a form of idling and wait for some time to use the machine again. If the machine does not reach the normal speed, we can not cut the rebar. Because it will not only destroy the machine, but also leave some unnecessary marks on the rebar.
In particular, we need to avoid the hard part on the steel bar. Do not use the hand to fix the material when cutting the steel bar so as not to affect the safety in the process of processing. The use of rebar cutting machine needs to be in accordance with the correct order of machine use, and before processing, we should adjust the equipment reasonably.
There are many points should be noted when operating the rebar cutting machine. From the user's point of view, a reasonable understanding of the rebar cutting machine will help us to use the machine easily.
May 22, 20191. Connection methodSteel trusses can be connected by welding, plain bolts, high strength bolts or riveted joints. Both welding and truss girder welding machine are widely used.2. Depth-span ratio The...view
July 21, 2019First, the operator must be familiar with the welding principle of the wire mesh welding line machine, the use of each control button, and then achieve the following two points:1. Be sure to read the ...view
June 3, 2019First, the four requirements for the maintenance of wire bending machine1. Neat: tools, workpieces, and accessories are placed neatly; safety protection devices are all in readiness; line piping is co...view
July 30, 20191. The operator of the platoon welding machine in the wire mesh welding line shall not touch any part of the body or any object near the gears, transmission grooves, sprockets, belts, chains, straight...view
August 29, 20191. Adjust the straightening block. There are five straightening blocks in the general straightening cylinder of wire straightening and cutting machine.The first and fifth straightening blocks must be ...view