TJK Machinery (Tianjin) Co, Ltd
TJK Realized the Upgrading of Steel Further Processing together with Ningxia Steel
I WANT TO BUY PRODUCTS

TJK Realized the Upgrading of Steel Further Processing together with Ningxia Steel TJK Realized the Upgrading of Steel Further Processing together with Ningxia Steel

In order to cope with the new normal of market environment, actively respond to the call of vigorously developing the industrialization of green buildings, Ningxia Stell and TJK carried out a deep strategic cooperation about chain extension of rebar  deep processing industry and then achieved remarkable results.

In the early 2014, Ningxia phoenix intelligent manufacturing co. LTD was founded in Yinchuan by NG. Based on technological innovation and informatization management, it built a specialized rebar processing and distribution center with large scale and high informatization degree. It went into production in September 2014, covering an area of 500 mu, and its registered capital was up to 500 million yuan. TJK provided a systematic solution to the market environment and central characteristics of Ningxia region, and selected more than 30 full sets of steel and intelligent equipment developed by TJK, with the design of the annual construction of steel reaching 500,000 tons. The production of the center has led NG to form a "one-stop" service system from steel production, rebar processing to trade.

New concept of smart factory for construction steel reinforcement and goods rebar distribution advocated by TJK, has been fully applied and implemented in NXFHC. On the basis of introducing the high quality and intelligent reinforcement of TJK, NXFHC introduces the software of MES information management system of rebar processing. During the process of information management of raw materials in the factory, production management, warehousing and distribution, etc , the intelligent and informationized transformation of rebar processing and distribution has also been realized, and a unique standardized and industrial production management mode has been gradually formed. In cooperation with the construction machinery, NXFHC has realized the innovation of technology and management to facilitate the transformation and upgrading of reinforcement works in the construction area, which completely reversed the disadvantages of low productivity, poor quality control and manual labor in traditional steel reinforcement engineering, and received high praise from the construction department and quality supervision department of Ningxia autonomous region.

In terms of innovation in technology and services, NXFHC has quickly developed a great market reputation, the steady management style not only wins the trust of customers, but also wins a huge market. In 2016, in the construction of the first high-speed railway between Wuzhong and Zhongwei in Ningxia, it is necessary to centralize production and management of steel rebar project because of time limitation and quality standard. NXFHC stood out in a lot of competitors relying on core advantages of high intelligence and high informatization. At the same time, it also cooperated again with TJK, completing the planning, production and supporting services of the whole line, and achieved successfully factory centralized processing supply of intercity high-speed railway reinforcement project in Ningxia region.

 








Related News
  • Striving to Carry Forward the

    Striving to Carry Forward the

    August 30, 2017To develop the good atmosphere of competition, learning, striving, mutual help, and to commend the advanced, encourage all staffs, TJK try to promote the overall development of the company. Recently, ...view
  • Eight of Nine Feet with Lots of Fun

    Eight of Nine Feet with Lots of Fun

    October 18, 2016In order to improve cultural quality and active their cultural life of employee, enhance enterprise cohesion, the trade union of TJK machinery actively develop healthy activities and constantly enrich...view
  • TJK Machinery Bending Hoop Machine Intelligent Integration

    TJK Machinery Bending Hoop Machine Intelligent Integration

    October 17, 2016After the inspection toward many factories of producing bending hoop machine, a reinforcement yard in Shandong finally chose the automatic stirrup bending machine WG12D--1 from TJK.With functions of i...view
  • Introduction to the Applications of Wire Drawing Machine

    Introduction to the Applications of Wire Drawing Machine

    June 16, 2016Wire drawing machine is also known as wire drawing bench, which is used a wide range of mechanical equipment in industrial applications.Wire drawing machine system is a very high demand for speed cont...view
  • TJK was Invited to Participate in the World Intelligent Conference  

    TJK was Invited to Participate in the World Intelligent Conference  

    August 25, 2017Recently, with the invitation of Tianjin Science and Technology Commission, TJK as a leader enterprise in the industry of intelligent rebar processing robot industrialization joined the world intellig...view
  • Communication

    Communication

    October 25, 2016On July 9th, 2016, the company organized training on the subject of "communication", which benefited me tremendously and make me learned the importance and skills of communication. People in the work ...view
  • TEL:+86 22-26907986
  • FAX:+86 22-26997888
  • EMAIL:tjksales@tjkmachinery.com
  • ADDRESS:Wuwei Rd., Lulugang Logistics Industrial Park, Tianjin, China
online