The appearance of reinforcing cage welder saves a lot of time for people to work, However, many people are not very clear about the specific operation methods of the reinforcing cage welder, but if you're using a cage welder, you don't know the details, it will affect the efficiency of the equipment. So, what details should be paid attention to when the steel bars are processed by the reinforcing cage welder?
1. Before processing the reinforcing cage welder, we should check the steel bar carefully to guarantee the quality of steel bar to the standard, and avoid wear and tear of reinforcing cage welder due to poor quality. We should ensure the quality of the steel bar in processing so as to ensure that the reinforcement cage is strong and durable.
2. Make sure the surface of steel bar is clean when processing steel bar, avoid stains, impurities, etc., on the surface of steel bar, which affects normal processing and production, for the reinforcement after straightening, there can be no local bending phenomenon, so as to avoid affecting the normal processing.
3. If reinforcing cage welder replaces the steel bars in the processing of steel bars, first of all, we need to have a good understanding of the replacement materials, check whether strength, hardness can reach the strength of steel bar, to avoid affecting the normal use. Steel bar processing equipment has developed rapidly in recent years and has become an indispensable mechanical equipment in construction engineering.
The development of the reinforcing cage welder, which is the mechanical equipment with high frequency, its development is even more important. The integration of new technology makes the welding machine more convenient to operate.
April 7, 2019Installation steps of stirrup bending machine:1. When the stirrup bending machine and straightener are installed together, the center line of the straightener must be found, and it shoule be in the sa...view
May 1, 20191) When doing the welding and cutting work, especially when cutting gas,sparks, molten beads and iron slag splash around (larger beads and iron slag can splash 5m away from the operating point at the ...view
September 28, 2018In normal life, we all know that no matter what, the professional one is always good, let alone a factory of large production. So as to the selection of the rebar bender and cutter machine, we should ...view
July 15, 2019Common fault treatment of wire mesh welding line machine:Screen black screen: first check whether there is power supply, power fuse, and whether the circuit between the screen and the main circuit boa...view
June 3, 2019First, the four requirements for the maintenance of wire bending machine1. Neat: tools, workpieces, and accessories are placed neatly; safety protection devices are all in readiness; line piping is co...view
August 5, 2018The working structure of reinforcing cage forming equipment can be divided into three parts: control system, drive system, traction system, and a welding feed system. The main function of the control ...view