Hand-held Portable Building Machine : New Machinery in Construction Industry
The function of the hand-held rebar cutter is to supply the gap of the construction machinery industry and the market that full of large machinery. It is difficult to cut the rebar with large machines for the small quantity. Rebar that is not too hard or too coarse can be cut off quickly.
There are many places to plug in a construction site, so this type of hydraulic rebar cutter is very convenient to use.
Of course, there is also a situation when need to continue to move, can not be fixed in a place to operate. In this situation, you can use a rebar fast cutter with a lithium battery. In addition to the fast function, it is also very light, you can use one hand to handle it.
There is another kind of machine called the electric rebar cutter, is a supplement to a rebar cutter machine, it is used to cut out the protruding rebar on the wall directly without too much manpower. All are electric, a light press can operate it. The only defect is high precision, more sophisticated, usually need to pay attention to its maintenance, otherwise, it would need after-sale service.
Another machine, with two functions of the rebar bender and cutter machine, can play a rebar bender machine and rebar cutter machine these two functions at the same time in the process of use. It can be manipulated with a single hand to complete the operation, it is easy to operate. At present, it can be considered as five-star level products and has not found competing rivals yet.
April 28, 2019Using Techniques of Wire Mesh Welding Line1) When doing the welding and cutting work, especially when cutting gas,sparks, molten beads and iron slag splash around (larger beads and iron slag can splas...view
March 17, 2019When we operate the rebar cutting machine, it is a key step to debug the rebar cutting machine, and it plays an important role in the production and processing of rebar. However, the reality is that m...view
August 4, 2018After using the wire straightener, the machine's step and work surface should be cleaned up, which is beneficial to the next using process of the wire straightener. There will not be too much deviatio...view
May 10, 2019The truss girder welding machine are often classified according to mechanical sketches, shapes of appearance and structural features.① According to the mechanical diagram, it is divided into simple a...view
November 27, 20181. The section which from 200mm to 250mm is checked on the metal wire and the surface of the wire must not be damaged when straightening.2. There are four vertical holes on the main pulling rod. The h...view
August 14, 2019The normal operation of mechanical equipment relies on the support of various parts. When there were problems occuring in some parts, the operation of the equipment will fail correspondingly.For the w...view